ATmega328 DIP-28, Microcontroller, Pre-loaded with Arduino UNO 16 MHz Bootloader CON22

Fr3,500

An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.

14 in stock

SKU: 139BRD Category:

Description

To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Uno board that has all of these built into the board.

Atmel’s ATMega328 8-Bit Processor in 28 pin DIP package.

  • with the 32K of flash memory  .
  • 23 I/O lines, 6 of which are channels for the 10-bit ADC.
  • Runs up to 20MHz with external crystal.
  • 1.8V to 5V operating voltage.

 

Related products